Cisco Systems ASR9001s, 9001S manual Installing and Removing Modular Port Adapters

Chapter 3 Installing Modules and Cables in the Chassis

Installing and Removing Modular Port Adapters

Figure 3-4 2-Port 10 Gigabit Ethernet Modular Port Adapter

- -

330784

0

STATUS

2X10GE- MPA- A9K

Table 3-2describes the 2-Port 10 Gigabit Ethernet modular port adapter LEDs.

Table 3-3	2-Port 10 Gigabit Ethernet Modular Port Adapter LEDs
LED Label		Color	State	Meaning
A/L		Off	Off	Port is not enabled.
		Green	On	Port is enabled and the link is up. The MPA A/L LED will
				blink green when there is traffic activity.
		Amber	On	Port is enabled and the link is down.
STATUS		Off	Off	Modular port adapter power is off.
		Green	On	Modular port adapter is ready and operational.
		Amber	On	Modular port adapter power is on and good, and the
				modular port adapter is being configured.

Installing and Removing Modular Port Adapters

These sections describe how to install or remove modular port adapters (MPAs) on the

Cisco ASR 9001 Router.

•Handling Modular Port Adapters (MPAs), page 3-6

•Online Insertion and Removal, page 3-6

•Modular Port Adapter (MPA) Installation and Removal, page 3-7

•Optical Device Installation and Removal, page 3-8

Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide

OL-26701-02 3-5