Bosch Power Tools 1613AEVS manual Centering the SUB-BASE Templet Guides, Guiding the Router

Page 14

BM 2610943371 07-06.qxp 7/24/06 9:03 AM Page 14

CENTERING THE SUB-BASE AND

TEMPLET GUIDES

Your router features the Bosch “Precision Centering Design”. Its sub-base is precisely centered at the factory. This positions the bit at the center of the sub-base and optional templet guides. Precision centering allows you to closely follow jigs such as straight guides, templets, and dovetail fixtures without worrying about bit walk-off from the intended cut line for any reason, including the orientation of the router’s handles.

In the event the sub-base screws are loosened or removed, such when preparing the router for use in a router table, here's how to re-center the sub-base when reattaching it:

To quickly re-center the sub-base, attach the sub-base using the set of flathead screws (included) and the countersunk screw holes in the sub-base. (Flathead screws have the tapered heads.) The flathead screws and countersunk holes will pull the sub-base into a position that is very close to centered.

FIG. 15

CENTERING CONE (optional accessory)

TEMPLET GUIDE

 

D

 

 

(optional accessory)

 

 

 

 

C

B

A

B

A

 

 

A

 

 

B

 

 

 

 

D C D

OR — To most precisely re-center the sub- base, attach the sub-base using the optional Bosch centering cone, an optional Bosch templet guide, and the set of pan-head screws (included). (Pan-head screws have rounded tops.) Follow steps 1-8.

1.Position the sub-base so that its pan-head screw holes are over the matching set of threaded holes in the base.

2.Insert the pan-head screws, not the flathead screws, through the sub-base and tighten them until they are snug, but still allow the sub-base to move.

3.Insert templet guide (optional accessory) the installed template guide adapter as described elsewhere in this manual.

4.Slide centering cone (optional accessory) through templet guide and into collet. Use narrow end of cone when inserting into 1/4” collet, wider end of cone when inserting into 1/2” collet.

5.Tighten collet nut with fingers to put slight grip on centering cone.

6.Lightly press centering cone into templet guide to center guide and sub-base.

7.Tighten the pan-head screws.

8.Remove centering cone. The precision centering of the templet guide and sub-base is complete.

A = M4 COUNTERSUNK SCREW

SUB-BASE HOLES

B= M4 PAN-HEAD SCREW HOLES

C= TEMPLET GUIDE ADAPTER SCREW HOLES

D= HOLES FOR ATTACHING ROUTER TO ROUTER TABLE MOUNTING PLATE

GUIDING THE ROUTER

The router can be guided through the work in any of several ways. The method you use depends, of course, on the demands of the particular job and on convenience.

For routing operations such as grooving or dadoing, it is often necessary to guide the tool in a line parallel to a straight edge. One method of obtaining a straight cut is to securely clamp a board or other straightedge to the work surface, and guide the edge of the router sub-base along this path (Fig. 16).

FIG. 16

BOARD

GUIDE

FEED

DIRECTION

SECURELY

CLAMP BOARD

GUIDE

-14-

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Read Before Using Ver la páginaCluttered benches and dark areas invite accidents Power Tool Safety RulesKeep your work area clean and well lit Distractions can cause you to lose controlSafety Rules for Routers Protruding cutting bit may cause tool to jumpSafety Rules for Router Table Necessary to stand on the table or its stand to reach themOthers may create a hazard Symbols Router Functional Description and SpecificationsON/OFF Trigger Switch Measures reduce the risk of starting the tool accidentallySelecting Bits AssemblyInstalling a Router BIT Removing the Router BITOperating Instructions Depth ROD and Turret Afterlock Fine AdjustmentFine Adjustment Knob Indicator Index Marker Dial Setting RPM Application Trigger Switch and LOCK-ON ButtonSoft Start Feature Electronic Variable Speed ControlRouter Feed Feeding the RouterStart Here Rate of FeedRouter SUB-BASE Workpiece Edgedust Extraction Hood Dust Collection While Edge FormingAttaching Dust Extraction Hood Screw Dust Extraction HoodGuiding the Router Centering Cone optional accessoryCentering the SUB-BASE Templet Guides Board Guide Feed Direction Securely Clamp BoardTemplet Guide Not included, available as accessoryGuide Adapter Offset WorkpieceOperation in Router Table Tool Lubrication MaintenanceAccessories Carbon BrushesConservez CES Instructions Règles de Sécurité GénéralesBlessures graves Règles de sécurité concernant les toupies La réparation des outils électriques doit être confiéeConsignes de sécurité pour table de toupillage Le plomb provenant des peintures à base de plombBM 2610943371 07-06.qxp 7/24/06 903 AM Symboles Gâchette MARCHE/ARRÊT Description fonctionnelle et spécificationsDéfonceuse Ouïes DE Ventilation Poignée Droite Bouton DEAssemblage Consignes d’utilisation Réglage FIN Afterlock Tige ET Tourelle DE ProfondeurPasse étant réalisée avec la tige de profondeur abaissée Bouton DE Réglage FIN Index DESystème DE Démarrage Progressif Commande Électronique DE Variation DE VitesseSUR Marche Cadran DE Réglage DE VitesseSens DE FERL’AVANCE Vitesse D’AVANCE Avance DE LA DéfonceuseCommen CER ICI Moulurage DE ChantsFixation DU Capuchon D’EXTRACTION DE Poussière ’emploi de l’outil avec ces accessoiresRamassage DE Poussière Lors DU Moulurage DE Chants VIS= Trous DE VIS À Tête Cylindrique M4 Centrage DE LA SOUS-EMBASE ET DES= Trous DE VIS Noyées M4 DE LA DéfonceuseDéport Pièce Guides DE GabaritAdaptateur DE Guide DE Gabarit Levier DE Déblocage DU Embase Coupe VIS MoletéeUtilisation avec la table de toupillage Lubrification DE L’OUTIL AccessoiresEntretien Balais OU CharbonsNormas de seguridad para herramientas mecánicas Personales gravesNormas de seguridad para fresadoras ServicioInstrucciones de seguridad para la mesa de fresadora BM 2610943371 07-06.qxp 7/24/06 903 AM De Ni-Cd SímbolosCon aislamiento doble Riesgo de arrancar la herramienta accidentalmente Descripción funcional y especificacionesFresadoras SubbaseRemoción DE LA Broca DE Fresadora EnsamblajeSelección DE Brocas Cuidado DEL Mandril PortaherramientaInstrucciones de funcionamiento Pomo DE Ajuste Fino Indicador Marcador DE Índice Varilla DE Profundidad Y TorretaAjuste Fino Posfijación Dial DE Control DE Velocidad Interruptor Gatillo Y Botón DE Fijación EN EncendidoDispositivo DE Arranque Suave Posición DEL DialComience Aquí Avance DE LA FresadoraVelocidad DE Avance Conformado DE BordesTrabajo Colocación DE LA Cubierta DE Extracción DE PolvoSubbase DE LA Fresadora Borde DE LA Tornillo= Agujeros Para Tornillos DE Cabeza Troncocónica M4 Centrado DE LA Subbase Y LAS Guías DE PlantillaCono DE Centrado accesorio opcional Guiado DE LA FresadoraBroca DE Adaptador DE Guías DE PlantillaGuía DE Plantilla Guía DEUtilización en la mesa de fresadora Lubricacion DE LAS Herramientas MantenimientoAccesorios Escobillas DE CarbonBM 2610943371 07-06.qxp 7/24/06 903 AM Remarques Notas Limited Warranty of Bosch Portable and Benchtop Power Tools

1613AEVS specifications

The Bosch Power Tools 1613AEVS is a versatile and powerful fixed-base router designed for professional woodworkers and DIY enthusiasts alike. Renowned for its outstanding performance and durability, this router is a valuable tool for any workshop. Its powerful 2.0 HP motor delivers impressive routing capabilities, making it suitable for a wide range of tasks, from edge profiling to mortising and decorative work.

One of the key features of the Bosch 1613AEVS is its variable speed control. This allows users to adjust the speed from 8,000 to 25,000 RPM, providing optimal performance for various routing applications. Whether working with softwoods or hardwoods, users can select the perfect speed to achieve clean, precise cuts while minimizing the risk of damage to the material.

The router also boasts a soft-start function, which gently ramps up the motor speed, allowing for smoother operation and reducing the potential for tool kickback. This is especially beneficial for beginners or those working with delicate materials. Additionally, the Bosch 1613AEVS is equipped with a constant response circuit that maintains speed under load, ensuring consistent results even when cutting tougher materials.

Another noteworthy characteristic of the 1613AEVS is its ergonomic design. The router features a comfortable grip and well-balanced body that reduces user fatigue during extended use. The integrated spindle lock allows for easy bit changes, while the included adjustable T-handle provides enhanced control and stability when routing.

For enhanced precision, the Bosch 1613AEVS comes with a transparent base that provides a clear line of sight to the workpiece. It also incorporates a dust extraction port that connects to standard vacuums, helping to keep the work area clean and free from debris.

In summary, the Bosch Power Tools 1613AEVS combines power, versatility, and user-friendly features. With its robust motor, variable speed control, soft-start technology, and ergonomic design, this router is well-suited for both professional and hobbyist woodworkers. Whether you're crafting intricate furniture pieces or simple decorative edges, the 1613AEVS is a reliable tool that delivers accuracy and performance.
Top Page Image Contents