Application Chart
Power load listings are recommendations only. If you are in doubt, try a test fastening using the next lightest power load.
Power fasteners and power loads are available in blister packs of 25 and cartons of 100.
IMPORTANT
•Recommended for use with Remington® power loads and power fasteners.
•If power fastener goes below the top surface of the board, use penetrating control disc (see illustration below) or wash- ered
•Operators and bystanders must ALWAYS wear goggles and ear protection which meet or exceed the accepted standards for adequate protection in your country. In the USA, refer to ANSI standards. In Canada, refer to CSA standards.
*Use power fastener with penetration control disc, part number 015549.
IMPORTANT
This tool is designed to use .22 caliber
5/8"
Straight Wadded | |
Power Load | Power Load |
CAUTION: Do not use any load other than the .22 caliber
.22 CALIBER Type A,
|
| Load |
| Color Code | |
| Stock | Level | Load | Case |
|
| Number | Number | Strength | Body | Head |
|
|
|
|
|
|
| A22C1 | 1 | light | brass | Gray |
| A22C2 | 2 | medium | brass | Brown |
| A22C3 | 3 | heavy | brass | Green |
| A22C4 | 4 | extra heavy | brass | Yellow |
|
|
|
|
|
|
119586 | 21 |