Teledyne powerpod 400 instruction manual Four to Twenty Milliamp Operation

10.5.3.		FOUR TO TWENTY MILLIAMP OPERATION	23
10.6.		SETTING LIMIT ALARMS	24
10.6.1.		SETTING A SINGLE CHANNEL’S HIGH LIMIT	24
10.6.2.		SETTING A SINGLE CHANNEL’S LOW LIMIT	24
10.6.3.		SETTING A SINGLE CHANNEL’S HYSTERESIS	24
10.7.		SETTING RATIO CONTROL PARAMETERS	25
ENABLING RATIO CONTROL			25
10.8.		CALIBRATING A CHANNEL TO ITS INCOMING SIGNALS	26
10.8.1.		RESETTING THE ZERO ONLY	26
10.8.2.		RESETTING THE SPAN ONLY	26
10.8.3.		RESETTING ZERO AND SPAN	27
10.8.4.		SETTING A MULTIPLICATION FACTOR	27
10.9.		SERIAL COMMUNICATION	28
10.9.1. COMMANDS			28
10.9.2. SET POINT QUERIES			28
10.9.3. ALARM/FLAG QUERIES			28
11.0	APPENDIX A		30
12.0	APPENDIX B		33
13.0	APPENDIX C		33
14.0	APPENDIX D		36
15.0	DRAWINGS		41
16.0	WARRANTY		42
16.1.		WARRANTY REPAIR POLICY	42
16.2.		NON-WARRANTYREPAIR POLICY	42

164-122012 PowerPOD 400 Page 4 of 42