1800126766_01_GV7091E2_110 X 154 06/11/12 16:15 PAGE3
Before cleaning, ensure your steam generator is unplugged and that the soleplate and the iron have cooled down.
Rinsing the boiler (once a month)
•To extend the efficient operating life of your boiler and avoid scale particles on your linen, your generator is equipped with an orange “boiler rinse” warning light that flashes on the control panel after about 10 uses - fig. 9.
•If the orange “boiler rinse” warning light flashes, you can continue ironing normally but remember to rinse the boiler first the next time that you use it.
•Before proceeding, check that the generator is cool and unplugged for more than 2 hours.
•Place the steam generator on the edge of your sink, with the iron placed to one side, standing on its heel.
•Unscrew
•Using a coin, gently unscrew the boiler rinse cap - fig. 11.
•Holding the steam generator in a tilted position, and using a jug, fill the boiler with ¼ litre of untreated tap water - fig. 12.
•Shake the base unit for a few moments and then empty it completely into your sink - fig. 13.
•To obtain the best results, we recommend that this operation is done twice.
•Screw back and tighten up the boiler rinse cap with a coin.
•Put the boiler rinse cap cover back in place.
•The next time you use the generator hold down the “RESTART” button for a few seconds to turn off the orange light - fig. 17.
EN DE FR NL ES PT IT DA NO SV
Storing your generator
•Press the illuminated on/off switch and unplug the generator.
•Warning: do not touch the soleplate while still hot.
•Fold the carrying arm down onto the iron until it clicks into position, ensuring that your iron is safely locked onto its housing.
•Store the electrical cord in its storage place - fig.7.
•Store the steam cord in the cord storage clip - fig.8.
•Leave the iron (and the iron rest) to cool down for 1 hour before storing it away.
3
FI
TR
EL
PL
CS SK HU SL RU UK HR RO ET LT LV