Sigma S2Ba, S2Ca warranty Control elements and key functions, Control elements overview

Control elements and key functions

Control elements: overview

4

3

2

1

5

16

6 7 8

9

10

15 14 13 12 11

1Operating light (green)

2 Warning light (yellow)

3 Error warning light (red)

4 Stroke length adjuster

5 LCD display

6 UP key

7 DOWN key

8 P key

9 STOP/START key

10i key

11Relay output (optional)

12Metering monitor socket

13Float switch socket

14External control socket

15Diaphragm rupture indicator socket

16Mains switch

Key functions

		In continuous display mode	In settings mode
		(operating)	(settings)
STOP/START key
STOP
START
Press briefly		Stop pump,	Stop pump,
		start pump	start pump
P key
P
Press briefly		Start batch (in “batch” operating mode only),	Confirm entry- jump to next menu
		Cancel error	option or continuous display
Press for	2 s	Change to settings mode	---
Press for	3 s	---	Jump to continuous display
Press for 10 s		Software version displayed
Press for 15 s		Load factory settings (calibration)	---
i key
i
Press x1		Toggle between continuous displays	Toggle between “change individual digits”
			and change a figure"
Press x2		---	For “change individual digits”:
			jumps to first digit
Arrow keys UP and DOWN
Press separately		Change directly alterable values	Select other settings,
(until “Set” appears)			change individual digit or figure

Press simultaneously Prime (in “stroke rate” permanent display) ---