Sigma S2Ca, S2Ba warranty Settings

Dulcodes UV-Desinfektionsanlage Settings

Confirm entries

Exit menu option without confirming

7Settings

NOTE

¥Open out the fold-out page following the title page fully! There you will find the overviews Òcontrol elements and key functionsÓ and Òoperating settings diagramÓ.

¥If no keys are pressed within a period of 1 minute, the S2Ca will return to a continuous display.

Basic information for setting up the S2Ca

= Settings option

= flashes

Set ￿￿￿￿￿	P	Set ￿￿	P
P 3 s		P 3 s
continuous
display

Press the P key briefly;

you will automatically move to the next menu option or to a continuous display.
Press the P key for 3 s:
The entry￿￿￿￿is cancelled and you will￿￿￿￿return to a continuous display.￿￿￿￿
￿￿￿￿	i 2x
i 1x	P

Incremental change
of a value	Press the i key 1x;
	you can toggle between altering the digits of a value (“change individual digits” = standard) or
	incremental alteration of a value (“change a figure”).
Change adjustable values	Press UP or DOWN arrow key;
	The flashing digit or figure will start to increase or decrease incrementally.
Confirm adjustable values	For “change individual digits”: confirm each digit using the P key. When the last digit has been
	confirmed you will automatically move to the next menu option or to a continuous display.
	For “change a figure”; press the P key 1x; you will simultaneously move to the next menu option
	or to a continuous display.
Correct wrongly set digits	Press the i key 2x;
	you will go back to the first digit.

ProMinent® Page 43