HP R-2 MD01, R-2A, R-3A Outlet Control, Manage Users, Deletion of the admin user is prohibited

RPC SERIES OWNER’S MANUAL

RPC SERIES QUICK START (RPC-3, RPC-3A, AND RPC-5)

________________________________________________________________________________

RPC-3 Telnet Host

Revision F 3.03, (C) 1998

Bay Technical Associates

Unit ID: RPC3

	RPC-3 Menu:
	1) . . .	Outlet Control
	2) . . .	Manage Users
	3) . . .	Configuration
	4) . . .	Unit Status
	5) . . .	Reset Unit
	6) . . .	Logout
	Enter Selection:
	If the main menu fails to appear, ensure the
	correct cables and adapters are being used
	and that they are connected properly. Also,
	verify the serial communication
	parameters are correctly configured.
Outlet Control	From the RPC> prompt, enter one of the
	following commands: ON n, OFF n,
	REBOOT where “n” is the outlet number
	you want to command. Entering an outlet
	number of “0” sends the command to all
	outlets. Type “MENU” to return to the
	main menu. . Reboot only works on outlets
	which are in the “ON” condition.
Manage Users	New users (a maximum of 4 for the RPC-5
	or 8 for the RPC-3/3A) may be added or

deleted using this menu. Any time there is more than 1 user besides the admin, a “Delete user” function will appear. Any time the maximum number of users is reached, the “Add user” function will disappear.

Deletion of the admin user is prohibited.

9