RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
In the RPC Series’s main menu, #1 “Outlet Control” and #4 “Unit Status” allow the user to monitor and control the equipment attached to each of the RPC’s eight receptacles. Selection #3 puts the user into the configuration menu for setting network parameters, programming user login access, and outlet configuration. Selection #2 allows the admin user to manage optional users. Selection #5 resets the unit. A unit reset is required for some changes to take effect.
There are eight red LED’s on the front of the RPC unit. There is a corresponding red LED for each of the RPC’s eight receptacles. If any or all of the LEDs are illuminated, the corresponding receptacle(s) are turned "ON," and consequently, attached equipment is receiving power. If any one (or all) of the LED’s are not illuminated, the corresponding receptacle(s) are turned “OFF.”
Accessing Main Menu Power on the RPC unit. The following main
menu appears:
Revision F 3.03, (C) 1998
Bay Technical Associates
Unit ID: RPC3
1). . . Outlet Control
2). . . Manage Users
3). . . Configuration
4). . . Unit Status
5). . . Reset Unit
6). . . Logout
Enter Selection:
39