HP R-2A, R-2 MD01, R-3A, R-2 RDR manual To change outlet access, enter numbers of outlets. If

RPC SERIES OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

________________________________________________________________________________

Change Outlet List	The outlet list determines which outlets a
	particular user can access. From the User
	Management Menu, enter the number of the
	user to modify, followed by <cr>. Then
	select #2, “Change Outlet List.” The RPC
	Series responds:
	To change outlet access, enter number(s) of outlets. If
	more than one entry, separate numbers with commas.
	CR to exit.
	User Name: engineering
	Outlet	Access
	1) . . . Outlet 1	yes
	2) . . . Outlet 2	no
	3) . . . Outlet 3	yes
	4) . . . Outlet 4	yes
	5) . . . Outlet 5	no
	6) . . . Outlet 6	yes
	7) . . . Outlet 7	yes
	8) . . . Outlet 8	no

NOTE: If an outlet user’s list is changed and they are logged in at the time, their outlet list changes dynamically. If enabled, an updated outlet status report will be issued.

To toggle outlet access, enter the number that corresponds to the outlet you want to change. For example, if you want engineering to have access to Outlet 2, enter the number 2, followed by <cr>. If you want engineering to have access to Outlets 2, 5, and 8 enter the numbers 2, 5 and 8 separated by commas: 2,5,8, followed by <cr>.

46