HP 7000 Sheet-feed Basic troubleshooting tips, Error Code Paper Error Hardware Error Description

Page 29

(continued)

Error Code

Paper Error

Hardware Error

Description

The document feeder cannot pick up the paper or the paper is jammed. Follow these steps to resolve the error:

1.Remove the paper from the document feeder.

2.Sort through the stack to make sure the sheets are not stuck together.

3.Make sure the paper meets the size and weight specifications, as specified in the scanner User Guide.

4.Replace the stack of originals and try again.

Two conditions could generate this error.

A hardware failure occurred. Press the Power switch to the off position. Wait 30 seconds, and then press the Power switch to the on position. If the message is still displayed, see www.hp.com/support.

The scanner requires routine maintenance. View the maintenance message on your computer screen.

Basic troubleshooting tips

Simple issues such as smudges on the scanner glass or loose cables can cause your scanner to produce fuzzy scans, operate in an unexpected manner, or fail to operate. Always check the following items when you encounter scanning problems.

If scans are fuzzy, check to see if the glass strips inside the document feeder are dirty or smudged. If so, clean the glass strips.

If you are scanning a document using an OCR shortcut, make sure that the original document is clear and crisp enough to be scanned.

Make sure that the USB and power cables are firmly seated in their respective connectors on the back of the scanner, and that the power cord is plugged into a working electrical outlet.

If you have connected the scanner to the computer through a USB hub or through a USB port on the front of the computer, disconnect the scanner and then reconnect it to a USB port on the back of the computer.

Make sure that the scanner buttons are enabled.

Turn off the scanner, wait 60 seconds, and then turn on the scanner.

Make sure the scanner latch is closed.

Restart the computer.

If you continue to have problems, it is possible that your HP scanning software, firmware, or associated drivers are out of date or have become corrupted. See www.hp.com/ support to locate software, firmware, and driver updates for your scanner.

See also

Reset the scanner

Check that the scanner has power

Check the cables

Basic troubleshooting tips

27

Image 29
Contents HP Scanjet 7000/5000 Scanner Page Contents Product accessibility and support Scanner front panel buttons Scanner overviewScanner hardware LCD Scanner lamp settingHP Smart Document Scan Software Scanner softwareMain Window Scan Progress WindowHP Scanner Tools Utility Document loading tips Use the scannerLoad originals See also Load documents Chapter Tips on scanning and copying Scan and copyLoad cards into the document feeder Scan from ISIS- or TWAIN-compliant scanning software Scan from the scanner buttonsScan from HP Smart Document Scan Software Scan and copy Work with scan profiles Useful scanner featuresView profiles Create HP Smart Document Scan Software profilesCreate scan profiles that use third-party scanning software Scan extra long documentsImport and export HP Smart Document Scan Profiles Other application profiles area, click CreateReduce file size with hardware compression Hardware Misfeed Multipick Detection Filter out color from a document color dropoutChapter HP Scanner Tools Utility Maintenance tab Care and maintenanceOrder maintenance and scanning supplies Clean the scanner glassClean the paper path Clean the rollers Chapter Clean the rollers Replace the rollers Replace the rollers Scanner error codes TroubleshootingError Code Paper Error Hardware Error Description Basic troubleshooting tipsUninstall and then reinstall the HP Scanjet utilities Scanner installation troubleshootingCheck the cables HP Scanjet 7000 Utilities or HP Scanjet 5000 UtilitiesCheck the USB connection Scanner initialization or hardware problemsCheck that the scanner has power Scanner has stopped working correctly Reset the scannerScanner lamp stays on Scanner operation problemsScanner will not turn on Scanner scans only one side of a two-sided Scanner does not scan right awayScanned pages are missing at the scan destination Scanned image is fuzzyScan is completely black or completely white Scanned pages are out of order at the scan destinationOptimize scanning and task speeds Scanned images are not straight Scanner buttons are not working correctlyVertical white stripes appear on the printed Scan files are too largeWindows 2000 Click Properties Scanner paper path problemsPaper jamming, skewing, misfeeds, or multiple-page feeds Originals are curling up in the scanner output tray Scanning fragile originalsPaper does not feed from the scanner An item loaded in the scanner jams repeatedly Bottom of the scanned image is cut offScanned images have streaks or scratches Clear jams from the scanner paper path Contact HP Support Control of the scanner buttons Product accessibility and supportLCD Reader Getting assistance Index
Related manuals
Manual 120 pages 30.19 Kb