HP 330, 350 manual Print Cartridges, Software Programs, Media, PC Scan, Specifications

HP OfficeJet Series 300 Specifications (continued)

Function	Specification	Description
Copier Specifications	Scan Margins	Top margin = 3.0 mm± 3.0 mm
(Continued)		Bottom margin = 2.0 mm± 3.0 mm
		Left: U.S. letter = 0.0 mm± 3.0 mm
		A4 = 0.0 mm	± 0.0 mm
		Right: U.S. letter = 0.0 mm± 3.0 mm
		A4 = 0.0 mm	± 0.0 mm
		Width = 216.2 mm	± 2.6 mm12
	Scan Width	Maximum = 8.5 inches (216 mm)
	Current Connectivity	TWAIN 1.6 Interface
PC Scan	Scan Resolution	Software Determined
Specifications		203 x 196 dpi
		or 300 x 196 dpi

Print Cartridges

The HP OfficeJet uses one high–capacity black print cartridge, HP part number 51626A.

When printingtext only letter-size media, ink lasts, on average, about 1000 pages. Text used was C image number 1, the Slerexe Company letter. If text of greater density is printed or quality vary considerably. Ink cartridge longevity is also affected by larger paper sizes contai photos or illustrations. If the ink lasts much less than 1000 pages, ensureboththatpiecesyofutapehave rem from the print cartridge before beginning to use it, and that the conductive part of the c

Software Programs

Several software programs and drivers are provided. The Eclipse FAX SE is provided and use 350. The HP OfficeJet Series 300 Manager programs and Windows drivers are provided with all mod

DEclipse FAX SE allows the user to send high-quality faxes directly from the PC, rece and scan images into PC-based files.

DHP OfficeJet Series 300 Manager lets the user setup the HP OfficeJet Series 300 from the PC, usi Windows-based menus, rather than the device’s front panel. The Manager also serves displaying information and error messages. It also tells the user whether or not th 300 is properly connected.

DWindows drivers are provided. A DOS driver is provided with many applications, but one separately from Hewlett Packard. See “Ordering Information” later in this chapter fo to order the DOS driver.

Media

An HP OfficeJet Series 300 works with ordinary bond and photocopy papers. Paper properties are s paper manufacturers, and Hewlett-Packard has no control over such changes. For optimu (printing on both sides) for suitability, before you purchase large quantities.

Use plain bond or white photocopy paper of high quality. It should be free of:

D	Carbon	D	Loose Particles
D	Cuts or tears	D	Dust
D	Grease spots	D Curled, bent or frayed edges

Product Information1-11