Introduction
Use the guidelines in this chapter to keep the HP OfficeJet 300, 330, or 350 in the best operating con
Changing a Print Cartridge
When installing or replacing a print cartridge, following these recommendations will op extend the lifetime of the ink cartridge.
DKeep print cartridges in the print cradle in the machine to reduce exposure to air
DKeep new unused cartridges in their sealed packaging until ready to use
DDo not turn the machineOFF b fore printing is complete
1Open the control panel, then the top cover2 Pull. the print cartridge toward you until i releases and snaps forward.
| SL30 | SL44 |
|
| |
3 |
| Lift the print cartridge out of its cradle. Open the new print cartridge box and contai |
| 4 | |
|
| then grasp the print cartridge by the green |
|
| and remove the cartridge from the contain |
|
| Gently removeboth pieces of tape (blue and |
|
| white) covering the ink nozzles and. vent hole |
CAUTIONS: 1) If you don’t remove the white tape, the ink in the cartridge wil be depleted prematurely.
2) Do not to touch the ink nozzles or the copper contacts. Fingerprints may damage them.
SL45
SL16