Click on the tab (Information, Parameters, Report, Language, or Remote to move between wi
TheApplybutton applies the selected parameter, language, or remote setting to the HP Offic
Exiting the Service Application
| Whenever exiting the Service Application Program, allow 5 to 10 seconds for t |
| |
| terminate the factory and service capability. |
|
|
To exit or quit the program, clickExitbuttonthe.After depressingExitbutton,the be sure to wait 5 to 10 second for the hardware to terminate the factory and service capability before taking any othe observe the HP OfficeJet front panel LCD display for the following events:
DThe phrase “Enter header number” appears on the top line of the HP OfficeJet LCD displa
DA string of characters appears on the bottom line of the HP OfficeJet LCD display.
DThe HP OfficeJet LCD display blanks out briefly and returns to the normal “ready” stat
Changing Parameters
Clicking on the “Parameters” tab in the service application main menu causes the window t
To change an HP OfficeJet parameter, perform the following steps:
1.Enter theparameter number.
2.Click onRetrieveto display the current value.
3.Type the new value Enterin the new valuedialog box.
Note:If the user enters the same value in the “Enter new value” dialog box that appea in the “Current value” DialogRetrievebox, theandApplybuttons will be grayed