out. Either change the value in the “Enter new value” dialog box or enter a new parameter number into the Parameter number dialog box.
4.Click on theApplybutton to set the HP OfficeJet with the new parameter value. If you want to change another parameter, repeat step 1.
Because there minimizeis o button, use the alt and tab keys to hide or show the HP OfficeJet Servi window if another application has covered the Service Application window.
Exiting the Service Application
| Whenever exiting the Service Application Program, allow 5 to 10 seconds for t |
| |
| terminate the factory and service capability. |
|
|
To exit or quit the program, clickExitbuttonthe.After depressingExitbutton,the be sure to wait 5 to 10 second for the hardware to terminate the factory and service capability before taking any othe observe the OfficeJet front panel LCD display for the following events:
DThe phrase “Enter header number” appears on the top line of the HP OfficeJet LCD displa
DA string of characters appear on the bottom line of the HP OfficeJet LCD display.
DThe HP OfficeJet LCD display blanks out briefly and returns to the normal “ready” stat
Printing a Parameter Report
Clicking on the “Report tab in the service application main menu causes the window to appe
To print a parameter report, clPrintck onparameterthe reportbutton.
Note: There is a 5 second delay before printing begins.