Network setup
Chapter 2
Note 2 Installation time can range from 20 to 45 minutes depending on your operating system, the amount of available space, and the processor speed of your computer.
To install the Windows HP All-in-One software
1.Quit all applications running on your computer, and any firewall or virus detection software.
2.Insert the Windows CD that came with the HP
3.If a dialog box pertaining to firewalls appears, respond as follows:
–The Issues Stopping Installation screen means that a firewall or
Note If the Issues Stopping Installation screen appears after the firewall or
–The Notice about Firewalls means that the Microsoft Internet Connection Firewall or Windows Firewall is enabled. Click Next to allow the Setup program to open the necessary ports and continue with the installation. If a Windows Security Alert appears for a program published by
4.On the Connection Type screen, select Through the network, and then click Next.
The Searching screen appears as the Setup program searches for the HP
5.On the Printer Found screen, verify that the printer description is correct.
If more than one printer is found on the network, the Printers Found screen appears. Select the HP
To see the device settings on the HP
6.If the device description is correct, select Yes, install this printer.
7.At the prompt, restart your computer to finish the installation process.
When you have finished installing the software, the HP
8.If you disabled a firewall or virus detection software on your computer, make sure to enable it again.
9.To test your network connection, go to your computer and print a
To install the Mac HP All-in-One software
1.Quit all applications running on your Mac.
2.Insert the Mac CD that came with the HP
3.
4.In the Authenticate dialog, enter the Administrator password used to access your Mac or network.
The installer software looks for HP
12 | HP Photosmart C6100 |