Troubleshooting and support
Chapter 5
To establish an active network connection
1.Check the cable connections from the HP
2.If the connections are secure, turn off the power on the HP
I received a System Requirements Error: No TCP/IP
Cause Your Local Area Network (LAN) card is not installed properly.
Solution Make sure your LAN card is installed properly and set up for TCP/IP. See the instructions that came with your LAN card.
The Printer not Found screen appears during installation
Cause The HP
Solution Turn on the HP
Cause You do not have an active network connection.
Solution Make sure you have an active network connection.
To make sure your network connection is active
1.If the connections are secure, turn off the power on the HP
2.Check the cable connections from the HP
3.Make sure the HP
Cause Cables are not connected properly.
Solution Check the following cables to ensure they are connected properly:
●Cables between the HP
●Cables between the hub or router and your computer
●Cables to and from your modem or HP
Cause A firewall,
Solution Uninstall the HP
Cause A Virtual Private Network (VPN) is preventing the HP
Solution Try temporarily disabling the VPN before proceeding with the installation.
Note The HP
Cause The Ethernet cable is not plugged in to the router, switch, or hub, or the cable is defective.
94 | HP Photosmart C6100 |