![](/images/new-backgrounds/1270345/270345145x1.webp)
Chapter 4
7.Repeat steps 2 through 5 for each ink cartridge you are replacing.
8.Close the ink cartridge door.
Use the HP All-in-One features
Align the printer
The printer automatically aligns when ink cartridges are replaced. You might want to use this feature when the
If you still have print quality problems after aligning the printer, try cleaning the print head. If print quality problems persist after aligning and cleaning, contact HP customer support.
To align the printer from the control panel
1.Load letter, A4, or legal unused plain white paper into the input tray.
2.Press Setup.
The Setup menu appears.
3.Press to highlight Tools, and press OK. The Tools menu appears.
4.Press to highlight Align Printer, and press OK.
5.The HP
A success or failure message appears.
Note If you have colored paper loaded in the input tray when you align the printer, the alignment will fail. Load unused plain white paper into the input tray, and then try the alignment again.
If the alignment fails again, you might have a defective sensor or ink cartridge. Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
6.Press OK to continue.
7.Recycle or discard the page.
Clean the HP All-in-One
To ensure that your copies and scans remain clear, you might need to clean the glass and lid backing. You might also want to dust the exterior of the HP
●Clean the glass
●Clean the lid backing
●Clean the exterior
70 | HP Photosmart C6100 |