3.Press until Advanced Setup is highlighted, and then press OK. Press until IP Settings is highlighted, and then press OK.
4.Press until Manual is highlighted, and then press OK.
5.Press to highlight one of the following IP settings, and then press OK.
–IP Address
–Subnet Mask
–Default Gateway
6.Enter your changes, and then press OK to confirm the setting.
Use the Embedded Web Server
If your computer is connected to an HP
For information on how to use the features available in the Embedded Web Server, see the onscreen help within the Embedded Web Server. To access Embedded Web Server help, open the Embedded Web Server, then click the Help link under Other Links on the Embedded Web Server Home tab.
Note Only use the Embedded Web Server to change network settings if you cannot access the HP
●Access the Embedded Web Server
●Use the Embedded Web Server setup wizard
Access the Embedded Web Server
You can only access the Embedded Web Server on a computer connected to an HP All-
To access the Embedded Web Server
1.Print a network configuration page to find the IP address for the HP
2.In the Address box in your Web browser on your computer, type the IP address of the HP
The Embedded Web Server Home page appears, showing information for the HP
Note If you are using a proxy server in your browser, you might need to disable it to access the Embedded Web Server.
3.If you need to change the language displayed in the Embedded Web Server, do the following:
a.Click the Settings tab.
b.Click Select Language in the Settings navigation menu.
c.In the Select Language list, click the appropriate language.
d.Click Apply.
Network setup
Basics Guide | 25 |