HP C6150 manual Manage your network settings, Change basic network settings from the control panel

Page 25

Network setup

Chapter 2

To change a USB connection to a wired (Ethernet) connection

1.Unplug the USB connection from the back of the HP All-in-One.

2.Connect an Ethernet cable from the Ethernet port on the back of the HP All-in-One to an available Ethernet port on the router or switch.

3.Install the software for a network connection, choose Add a Device, and then choose Through the network.

4.(Windows only) When the installation is complete, open Printers and Faxes in the Control Panel and delete the printers from the previous USB installation.

Manage your network settings

You can manage network settings for the HP All-in-One through the HP All-in-One control panel. Additional advanced settings are available in the Embedded Web Server, a configuration and status tool you access from your Web browser using an existing network connection to the HP All-in-One.

●Change basic network settings from the control panel

●Change advanced network settings from the control panel settings

●Use the Embedded Web Server

●Network configuration page definitions

Change basic network settings from the control panel

The HP All-in-One control panel enables you to set up and manage a wireless connection and to perform a variety of network management tasks. This includes viewing the network settings, restoring the network defaults, turning the wireless radio on and off, and changing the network settings.

●Use the Wireless Setup Wizard

●View and print network settings

●Restore network defaults

●Turn the wireless radio on and off

●Print the wireless network test

Use the Wireless Setup Wizard

The Wireless Setup Wizard provides an easy way to set up and manage a wireless connection to the HP All-in-One.

To run the Wireless Setup Wizard

1.On the control panel of the HP All-in-One, press Setup.

2.Press until Network is highlighted, and then press OK.

3.Press to highlight Wireless Setup Wizard, and then press OK. This runs the Wireless Setup Wizard.

View and print network settings

You can display a summary of the network settings on the HP All-in-One control panel, or you can print a more detailed configuration page. The network configuration page lists all of the important network settings such as the IP address, link speed, DNS, and mDNS.

22	HP Photosmart C6100 All-in-One series

Image 25

Contents HP Photosmart C6100 All-in-One series Basics Guide Hewlett-Packard Company notices Contents Index Print from your computer Print photosCopy ScanLabel Description HP All-in-One at a glanceControl panel features Label Name and Description Use the HP Photosmart software Find more information Access the onscreen HelpHP Photosmart Mac Help appears If you want to Wired network setupSee this section Connect the HP All-in-One to the network What you need for a wired networkTo connect the HP All-in-One to the network Install the software for a network connectionTo install the Mac HP All-in-One software To install the Windows HP All-in-One softwareWhat you need for an integrated wireless Wlan 802.11 network Integrated wireless Wlan 802.11 network setupTo connect the HP All-in-One with the Wireless Setup Wizard Connect to an integrated wireless Wlan 802.11 networkIf you do not see your network name in the list What you need for an ad hoc network Wireless ad hoc network setupPrepare a Windows XP computer To prepare your computer To disable LAN connections with Windows XPOn the Windows Control Panel, click Security Center To create a network profileTo create a new network profile Prepare a MacSelect Create Network… Create a network profile for other operating systemsClick Show Options Communication mode Ad Hoc Encryption enabled Connect to a wireless ad hoc networkTo connect to a wireless ad hoc network Connect to additional computers on a network Change basic network settings from the control panel Manage your network settingsTo run the Wireless Setup Wizard Restore network defaults To view and print the network settingsTo restore network defaults Turn the wireless radio on and offAutomatic Full Half Access the Embedded Web Server IP Address Subnet Mask Default GatewayTo access the Embedded Web Server Use the Embedded Web ServerUse the Embedded Web Server setup wizard Network configuration page definitionsTo access the Embedded Web Server setup wizard General network settingsParameter Wired 802.3 network settingsWhen you use the web or send an e-mail message, you use a Wireless 802.11 network settings Plugged in and connected to an active network Ssid Parameter Bluetooth settings Countries/regions with a parallel-type phone system Set up the HP All-in-One for faxingUSA Choose the correct fax setup for your home or officeSelect your fax setup case Recommended fax setup for parallel-type phone systems Other equipment/ services sharing your fax lineRecommended fax setup for serial-type phone systems Not applicable ServiceUp modem, and answering MachineTo set up the HP All-in-One with a separate fax line Case B Set up the HP All-in-One with DSLCase a Separate fax line no voice calls received Back view of the HP All-in-OneTo set up the HP All-in-One with DSL Fax setup To set up the HP All-in-One with a distinctive ring service Case D Fax with a distinctive ring service on the same lineCase E Shared voice/fax line To set up the HP All-in-One with a shared voice/fax lineCase F Shared voice/fax line with voice mail To set up the HP All-in-One with a computer dial-up modem To set up the HP All-in-One with voice mailCase H Shared voice/fax line with computer dial-up modem Example of a parallel splitter Fax setup Answering machine Case I Shared voice/fax line with answering machineFax setup Example of a parallel splitter Fax setup Example of a parallel splitter Set the answer mode Change settings on the HP All-in-One to receive faxesSet the number of rings before answering To set the answer modeChange the answer ring pattern for distinctive ringing To test your fax setup from the control panel Test your fax setupTo set a default fax header from the control panel Set the fax headerFax setup Load an original in the automatic document feeder Load originals and load paperTo load an original in the document feeder tray Load 10 x 15 cm 4 x 6 inch photo paper Load an original on the glassTo load an original on the glass To load 10 x 15 cm 4 x 6 inch photo paper in the photo tray Avoid paper jamsScan an image Make a copyScan an original to a computer To make a copy from the control panelPress Scan Menu Make reprints of your photosPress OK to select Select Computer Press ReprintsScan an original to a memory card or storage device Defaults optionPrint Options Print PreviewTo print one or more 10 x 15 cm 4 x 6 inch photos Print 10 x 15 cm 4 x 6 inch photosTo print more than one copy of the selected photo Print from a software applicationTo edit the selected photo before printing To select additional photos for printingTo print from a software application Mac To print from a software application WindowsReplace the ink cartridges Send a basic faxTo send a basic fax from the control panel Press Fax MenuTo replace the ink cartridges Use the HP All-in-One features Align the printer Clean the HP All-in-OneTo align the printer from the control panel To clean the glass Clean the glassClean the exterior Clean the lid backingTo clean the lid backing Troubleshooting common setup issues Uninstall and reinstall the softwareTo uninstall from a Windows computer and then reinstall To uninstall from a Mac and then reinstall Hardware setup troubleshootingHP All-in-One will not turn on To set your language and country/region Display shows the wrong languageWrong measurements are showing in menus on the display Fax setup troubleshootingFax Hardware Test failed Fax test failedFax Connected to Active Telephone Wall Jack test failed What to doPhone Cord Connected to Correct Port on Fax test failed Using Correct Type of Phone Cord with Fax test failed Dial Tone Detection test failed Fax Line Condition test failed HP All-in-One is having problems sending and receiving faxes Troubleshooting and support Troubleshooting and support Try setting the Fax Speed to Medium 14400 or Slow HP All-in-One cannot send faxes, but can receive faxes If you hear noise, do the followingHP All-in-One is having problems sending a manual fax HP All-in-One cannot receive faxes, but can send faxes Telephone wall jack Troubleshooting and support Fax tones are recorded on my answering machine Telephone wall jack Wired network setup troubleshooting Network troubleshootingPrinter not Found screen appears during installation Received a System Requirements Error No TCP/IPTo establish an active network connection To make sure your network connection is activeTo print the network configuration Wireless setup troubleshootingYou do not see the Ssid Error message Cannot connect to network Weak signalCause An invalid WEP key was entered Error message Invalid WEP KeyError message Invalid passphrase Network software installation troubleshootingError message More than 1 SecureEZ Setup access point found To clear a paper jam from the rear door Clear paper jamsTo clear a paper jam in the automatic document feeder Information on ink cartridges Calibration errorInk cartridge messages Cannot printInk cartridges are empty Ink cartridge problemInk cartridges are expired Ink expiration nearNon-HP ink Print head assembly is stalledOriginal HP ink depleted Print head failure To clear the print head assemblyPrinter alignment failed Replace ink cartridges soonWrong ink cartridges installed Support process Additional warranty optionsHP support by phone Phone support period Placing a callPrint specifications Paper specificationsSystem requirements Paper tray capacitiesScan specifications Copy specificationsFax specifications Physical specificationsInk cartridge warranty information Environmental specificationsRegulatory notices Regulatory model identification numberWarranty Index Left arrow Basics Guide 113 114

Related manuals

Manual 16 pages 14.64 Kb