4. Connection of Solution Hose:
Connect the high pressure solution hose to the solution outlet (female quick connect on the front of the machine). Connect the other end of the hose to the male quick connect on the cleaning tool. When you are ready to start cleaning, turn the solution pump switch to the ON position
HP Solution Hose Assembly – AH79D 1/4” id X 25’ with
Connect the male end of the HP Solution Hose Assembly to the female solution outlet fitting on the machine. Connect the female end to the cleaning tool.
5. Connection of Vacuum Hoses:
There are three components used to connect the cleaning tool to the vacuums and recovery tank:
1.A short 4’ vacuum hose: Connected to the vacuum barb on the front of the machine and to the outlet side of the Hydro Filter.
2.A Hydro Filter
3.A 25’ Vacuum Hose: The 2” cuff on the 25’ vacuum hose is connected to the inlet side of the hydro filter. The other end with the
When ready to begin cleaning, turn both vacuum switches to the ON position. While the M1200 can be operated with only one vacuum for cleaning delicate fabrics, in most situations you will turn both vacuum switches ON.
Short Vacuum Hose
Vacuum Hose
Optional Accessories
Foam Downer (included):
A key problem with portable extractors is that they have small tanks where foam dissipates slowly. If you have had issues with foam or are anticipating foaming problems, you will want to setup your Foam Downer.
13