1Section
Safety
CAUTION! This machine is an electrical appliance. Care must be taken to reduce the risk of electrical shock.
•READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING THE M1200.
•To reduce the risk of property damage or injury, repairs to electrical systems should only be performed by experienced technicians. Contact your distributor for assistance.
•Unplug machine power cord from outlet before performing any repairs on the extractor.
•Plug unit into grounded outlets only. Do not remove ground prong from plug. Use of a Ground Fault
Interrupting (GFI) device will reduce the risk of electrical shock.
•Do not use the M1200 outdoors, in standing water or on wet surfaces.
•Do not store the M1200 in wet conditions.
•If extractor is leaking, unplug machine power cords from outlets before approaching or touching machine.
•Do not unplug power cord by pulling on the cord. Grasp the plug when unplugging the cord.
•Do not pull the extractor by the cord.
•If cord or plug is damaged, do not use cord. Replace with new cord or repair as needed before use.
•The power cords used must be able to handle an electrical load of 20amps each.
•The two power cords must be plugged into separate circuits during operation. Power Cord #1 must be on a 20amp circuit to use both vacuums. Power Cord #2 can be on a 15amp if the Auto
6