FLUSH CHEMICAL SYSTEM:
Chemical
•Rinse the chemical system with fresh water (For heavy chemical build- up, a mild acid can be added to the rinse water.)
•Remove the chemical feed hose from the solution tank and place the end of the hose in a bucket of fresh water or mild acid solution.
Place Chemical Feed Hose into Rinse Solution
•Connect the
•Connect the other end of the hose to a water faucet and turn on the water. Let the water flow into the tank until you are sure the rinse solution has been drawn through the proportioner and mixed with the incoming water. The metering tip can be removed from the proportioner to speed up the process.
•Once the rinse solution has been drawn through the proportioner, turn off the water faucet and disconnect the
•Plug in Cord #1, connect the short 4’ vacuum hose to the vacuum barb, turn on one or both vacuums, and use the short vacuum hose to remove the water from the solution tank.
•When the solution tank has been emptied, turn off the vacuums and unplug the power cord.
•Place a bucket under the drain valve and open the drain valve to drain the water from the recovery tank.
•Close the drain valve and dispose of the water.
Connect
Hose to machine and faucet
Vacuum water out of Solution
Tank
Drain water from Recovery
Tank
30