OLYMPUS SWITCH PANEL:
Vacuum #1 – Power from Cord #1. When the switch is turned to the ON position power is supplied to the vacuum motor.
Solution Pump Switch – Power from Cord #2. When the switch is turned to the ON position power is supplied to the solution pump motor. When not using solution (Extracting Only) do not turn this switch ON.
Vacuum #2 – Power from Cord #1. When the switch is turned to the ON position power is supplied to the vacuum motor.
Waste Pump Switch – Power from Cord #2. When switch is turned to the ON position, Waste Pump operation is controlled by the Float Switch in the Recovery Tank. Pump will remain off until water level rises to the point at which the float switch will turn the Waste Pump ON. Do not turn Waste Pump Switch ON unless a hose is connected to the
24