reach a person in the bath, shower or at the
-In the event of a wall mounting, the height from the floor must be a minimum of 1.50m.
Disassembly of the Wall-mounted
-Unhook the appliance from the adjustable foot. To do so, press the two catches which support the swivel pins of the adjustable foot.
-Using a screwdriver, remove the screws until the adjustable foot can be unhooked from the wall. -
-Place the adjustable foot in the wall
and screw it into the plugs (screws not included).
-Fit the appliance body into the two catches which support the swivel pins of the adjustable foot.
Cleaning
-Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
-Clean the equipment with a damp cloth with a few drops of
-Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
-Never submerge the appliance in water
or any other liquid or place it under running water.
-Remark: When the appliance is used as a heater after long periods in storage or after having been used solely as a fan a small
amount of smoke may be produced. This is not important and is due to the heater burn- ing dust deposits which have accumulated on the heating element. This phenomenon may be avoided by cleaning the inside of the appliance beforehand through the grill with a vacuum cleaner or pressurised air.
Anomalies and repair
-Take the appliance to an authorised technical support service if problems arise. Do not try to dismantle or repair without assistance, as this may be dangerous.
-If the connection to the mains has been damaged, it must be replaced and you should proceed as you would in the case of damage.
Ecology and recyclability of the product
-The materials of which the packaging of this appliance consists are included in a collection, classification and recycling sys- tem. Should you wish to dispose of them, use the appropriate public recycling bins for each type of material.
-The product does not contain concentra- tions of substances that could be consid- ered harmful to the environment.
-This symbol means that in case you wish to dispose of the product once its working life has ended; take it to an authorised waste agent
Manual CA 2002 Jan 2010.indd 13
22.02.10 15:16:55