Taurus Group 2500 manual Service

-Use the appliance only for dry working tasks.

-Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.

-Do not use the appliance on any part of the body of a person or

animal.

Service:

-WARNING: There is a risk of fire if the appliance is not clea- ned following these instructions.

-Any misuse or failure to fo- llow the instructions for use renders the guarantee and the manufacturer’s liability null and void.

Instructions for use

Before use:

-Remove the appliance’s protective film.

-Make sure that all the product’s packaging has been removed.

-Prepare the appliance according to the function you wish to use.

Vacuuming function:

-Fit the hose unit to the vacuum cleaner’s air intake.

-To disconnect the hose unit from the vacuum cleaner, press the two buttons on the hose joint at the same time and pull outwards (Fig. 1)

Insertion of accessories into the appliance’s grip:

-The appliance’s grip is designed in such a way that it allows the insertion of the following accessories (use the combination that best meets your requirements)

-Extendable extension tube: Designed to provide access to surfaces which are out of reach and make floor cleaning comfortable, its length can be adjusted by using the adjustment control.

-Lid: Specially designed for cleaning floors (both rugs, carpets and hard floors), its base has a retractable brush that can be adjusted to two heights for greater efficiency on these floors.

-Lance: Specially designed for getting into cracks and difficult corners.

Manual Vitara 2500.indb 14

Use:

-Take the length of cable required out of the housing.

-Connect the appliance to the mains.

-Turn the appliance on using the on/off switch.

Once you have finished using the appliance:

-Turn the appliance off, using the on/off switch.

-Unplug the appliance to the mains.

-Retract the cable by pressing the roller cable button and guide the cable into the appliance.

-Clean the appliance

Cord housing

This appliance has a cable compartment situated on its posterior.

Carry handle/s:

-The device has a handle on the upper part so it can be transported easily and comfortably.

Parking position:

-This appliance has one parking position for comfortable and straightforward storage.

-To use the horizontal parking position, fix the break pad hook to the hook situated on the rear side of the appliance (Fig. 2)

Cleaning

-Disconnect the appliance from the mains and let it cool before undertaking any cleaning task.

-Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.

-Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.

-Do not submerge the appliance in water or any other liquid, or place it under a running tap.

Changing the dust bag:

- Change the dust bag when there is a noticeable reduc- tion in the suction power of the appliance. (The dust bag does not necessarily have to be full to need changing; for example, if very fine dust has been vacuumed this can cover the pores in the bag and make it necessary to replace it).

-In any case, change the bag when the bag full indicator is completely red.

-Disconnect the hose from the vacuum cleaner’s air intake. (Fig 3).

-Open bag compartment cover. (Fig 4).

-Remove the bag from the bag support.

-Check the condition of the motor filter.

-Replace the bag with another one, fitting it to the bag support.

-Close the bag compartment cover; making sure it is shut properly.

-Connect the hose to the vacuum cleaner’s air intake.

09/07/13 10:35