Taurus Group 2500 manual Changing the filters, Motor filter, Outlet filter, Anomalies and repair

Changing the filters:

-Motor filter, it is advisable to be changed at least once a year or every 100 hours of the appliance’s use.

-Oulet filter, it is advisable to be changed at least once a year or every 100 hours of the appliance’s use.

-To remove filters:

Motor filter:

-Disconnect the hose from the vacuum cleaner’s air intake. (Fig 3).

-Open bag compartment cover. (Fig 4).

-The filter motor can be found in the motor’s turbine air entrance. (Fig. 5)

Outlet filter:

-The outlet filter is located at the back of the vacuum cleaner. Remove the part which fixes the filter. (Fig.6)

-Remove the filter from its housing.

-To reassemble the filter, proceed with the above instructions, in reverse order.

Anomalies and repair

-Take the appliance to an authorised technical support service if problems arise. Do not try to dismantle or repair without assistance, as this may be dangerous.

-If the connection to the mains has been damaged, it must be replaced and you should proceed as you would in the case of damage.

For EU product versions and/or in case that it is reques- ted in your country:

Ecology and recyclability of the product

-The materials of which the packaging of this appliance consists are included in a collection, classification and recycling system. Should you wish to dispose of them, use the appropriate public recycling bins for each type of material.

The product does not contain concentrations of substan- ces that could be considered harmful to the environment

This symbol means that in case you wish to dispose of the product once its working life has ended, take it to an authorised waste agent for the selective collection of waste electrical and electronic equipment (WEEE)

This appliance complies with Directive 2006/95/EC on Low Voltage and Directive 2004/108/EC on Electromag- netic Compatibility.

Manual Vitara 2500.indb 15 09/07/13 10:35