Fujitsu CG-311 SERIES AGC Function, Electronic Sensitivity CON- Trol ESC Function

AGC FUNCTION

This function keeps the video output level of the camera by varying the gain control auto- matically.

The AGC function switch can be turned ON/OFF by moving #1 switch of Dip Switch right and left.

(Factory setup is AGC ON.)

ELECTRONIC SENSITIVITY CON- TROL (ESC) FUNCTION

This function changes the sensitivity of the camera by varying the electronic shutter speed according to the amount of incident ray.

ESC range; 1 : 300

The ESC function switch can be turned ON/OFF by moving #2 switch of Dip Switch right and left.

(Factory setup is ESC ON.)

CAUTION:

Set the FL Switch (#8 switch of Dip Switch) to “OFF“, otherwise ESC function does not work.

BACK LIGHT COMPENSATION (BLC) FUNCTION

The Back Light Compensation function allows fine picture correction to prevent the subject from being extremely dark due to strong back- light.

The BLC function switch can be turned ON/OFF by moving #3 switch of Dip Switch right and left.

(Factory setup is BLC OFF.)

CAUTION:

Set the AGC Switch (#1 switch of Dip Switch) to “ON“ for BLC function, otherwise BLC function does not work.

En-13