Fujitsu CG-311 SERIES Auto White Balance AWB, Synchronization Mode Sync, Line Lock Mode

AUTO WHITE BALANCE (AWB)

There are AUTO and HOLD in the white bal- ance adjustment in this camera. The white bal- ance is adjusted automatically to provide the optimum picture just by setting the white bal- ance selection switch to the AUTO. When you do not obtain the optimum white balance in AUTO, HOLD is used. At #5 switch of DIP Switch.

Left side: HOLD

Right side: AUTO

(Factory setup is AWB AUTO.)

CAUTION:

This function is color mode only.

En-16

SYNCHRONIZATION MODE (SYNC)

LINE LOCK MODE

(The camera using the 24VAC power supply) This mode allows the camera to use the phase of the AC power as the reference.

When attempting to phase a group of cameras together deviation from the AC power phase may be required.

This can be done with the phase adjustable Line Lock control.

(For the phase adjustment, refer to “L.L. ADJUSTER”.)

INTERNAL MODE

(The camera using the 12VDC power supply) In this mode, an inside crystal oscillator is used as INT. Sync Generator.

The synchronization mode can be selected by moving #6 switch of DIP Switch right and left . The meaning of switch is as follows,

Left side: Auto mode(DC: Internal, AC: Line Lock)

Right side: Internal mode (Factory setup is SYNC AUTO.)