Product Specifications MET-ECOM-D

Metreau Entry Communicators

Product Specifications - MET-ECOM-D

MET-ECOM-D Specifications

Power:	• PoE powered – no local Power Supply needed
	• IEEE 802.3af Compliant

Front Panel Components:	• OLED Display
	• Integrated Color Video Camera
	• Speaker
	• Dual Color LED Status Bar: (Yellow/ Red) can be used to provide feedback,
	to attract attention for action, or as general indicator.
	• Pushbutton (Doorbell)
	• Microphone

OLED Display:	• 4-bit Gray Scale

•1.6” Diagonal Display

•180° Viewing Angle

•2000:1 Contrast Ratio

•Unit stores up to 50 .bmp images

Integrated Color Video Camera: • QVGA 320x240

•Supports Motion JPEG (MJPEG) and H.263 codecs.

•Viewing Angle: 42°

Speaker:	• 8 Ohm, 2W
	• 80dB SPL (sound pressure level at 1 meter)
	• Meets G.711 sound standard

Microphone:	• -40 dB sensitivity, built-in echo cancellation (telephone quality)
	• Full duplex communication
	• VoIP Telephony

Rear Panel Components:	• Camera Viewing Angle Adjustment
	• Ethernet Port - 10/100 Ethernet with PoE. LEDs show communication
	activity, connection status, speeds, and mode information:
	SPD (speed) - Green LED lights On when the connection speed is 100
	Mbps and turns Off when the speed is 10 Mbps.
	L/A (link/activity) - Orange LED lights On when the Ethernet cables are
	connected and terminated correctly, and blinks when receiving Ethernet
	data packets.
	• ID/Reset pushbutton: Push to set the NetLinx ID (Device only) assignment
	for the device. Push and hold for at least 10 seconds to reset to factory
	default settings.
	• Status LED: Green LED provides an indication of both the system status
	and communication status with the target Master. 1 blink every 5 seconds
	indicates there is currently active communication between the Metreau unit
	and a target Master.
	• 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure
	with each input being capable of voltage sensing. Input format is software
	selectable with interactive power sensing for IR ports.
	• 2 Low Voltage Relays (1A contact): 2-channel single-pole single throw relay
	ports with each relay being independently controlled and supporting up to
	2 independent external relay devices.

Dimensions (HWD):	• 5.364” x 3.594” x 1.559”
	• 13.62 cm x 9.13 cm x 3.96 cm
	Note: Refer to the Mounting Specifications section on page 16 for mounting
	dimensions.

Weight:	0.90 lbs (0.408 kg)

Metreau Entry Communicators	5

Product Specifications - MET-ECOM-D

MET-ECOM-D Specifications

dimensions.