AMX MET-ECOM-D manual Setting the Intercom Session Timeout, Setting Intercom Auto Answer

Using the NetLinx Module

Setting the Intercom Session Timeout

When only 30 seconds are left in your call, the panel provides a popup to extend the call (FIG. 48).

Session time-outs are not applicable for calls with Metreau Entry Communicators.

1.Select the Setup button on your intercom page.

2.Press the up or down arrows to increment the timeout up by 1 second in each direction. If your call exceeds your session timeout the panel provides you with a popup (FIG. 48) to extend the session.

FIG. 48 Extend Call Popup

3.Press Exit when you are finished.

The session timeout can be disabled by setting the time to 0 (zero). If both panels have a timeout of 0, then the call must be manually terminated.

Setting Intercom Auto Answer

1.Select the Setup button on your intercom page.

2.Press the button beneath Auto-Answerto toggle the option. The button indicates its current state.

3.Press Exit when you are finished.

66 Metreau Entry Communicators