AMX MET-ECOM-D manual Camera Commands

Programming

Camera Commands

Unlike AMX touch panels, Metreau Entry Communicators return String responses instead of Command responses.

The Metreau Entry Communicators Camera (MET-ECOM-D only) supports the following camera SEND_COMMANDs on port 1.

Camera Commands

SET CAM-WBAL	Syntax:
Sets the white balance control	"'SET CAM-WBAL <tag>'"
setting for the camera.	Variables:
White balance setting allows
	• Tag: OFF (no white balance), AUTOMATIC, MANUAL_RGB, Presets
for internal light adjustments
	(DAYLIGHT, TUNGSTEN, FLUORESCENT, HORIZON).
based upon light conditions
	Example:
surrounding the unit.
	SEND_COMMAND MET1,"'SET CAM-WBAL HORIZON’"
	Sets the display white balance to horizon preset.
GET CAM-WBAL	Syntax:
Retrieves the white balance	"'GET CAM-WBAL'"
control setting for the camera.	Returns:
	CAM-WBAL= 45
	The White balance setting is 45.
SET CAM-RGB	Syntax:
Manually sets the RGB Gain	"'SET CAM-RGB <R-tag>, <G-tag>, <B-tag>'"
control for the camera.	Variables:
	• R-tag: Red channel gain setting 00 -FF.
	• G-tag: Green channel gain setting 00 -FF.
	• B-tag: Blue channel gain setting 00 -FF.
	Example:
	SEND_COMMAND MET1,"'SET CAM-RGB #222D0B'"
	Manually sets the RGB Gain parameters to Red 34, Green 45 and
	Blue 11.
GET CAM-RGBGAIN	Syntax:
Retrieves the RGB gain con-	"'@CAM-RGBGAIN <R-tag>, <G-tag>, <B-tag>'"
trol setting for the camera.	Variables:
	• R-tag: Red channel gain setting 0 -255.
	• G-tag: Green channel gain setting 0 -255.
	• B-tag: Blue channel gain setting 0 -255.
	Returns:
	CAM-RGBGAIN= 45
	The White balance setting is 45.

56 Metreau Entry Communicators