AMX MET-ECOM-D manual Select the device’s firmware file from the Files section FIG

Programming

Selected Firmware file Description field for selected KIT file

Firmware download status

Device value and System number must match the values

listed in the Workspace window

FIG. 46 Send to NetLinx Device dialog

6.Select the device’s firmware file from the Files section (FIG. 46).

7.Enter the Device value associated with the device and the System number associated with the Master (listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out.

8.Click the Reboot Device checkbox. This causes the Metreau Entry Communicator to reboot after the firmware update process is complete.

9.Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog (FIG. 46). Do not pull power from device during transfer, it can take approximately 5 minutes to finalize firmware transfer. The upgrade can still be in progress when the bargraph reaches the end, it is a good idea to wait until the process is complete.

10.Click Close (after the device reboots) to return to the main program.

11.Right-click the associated System number and select Refresh System. This causes a refresh of all project systems, establishes a new connection to the Master, and populates the System list with devices on your particular system.

64 Metreau Entry Communicators