AMX MET-ECOM-D manual Setup

Using the NetLinx Module

Sample Intercom Page (Cont.)
No.	Name	Description	Channel	Address	Level
			Port:Code	Port:Code	Port:Code
27	Monitor Panel	Display only; indicates the	1:35
		panel is being monitored by
		another panel.
28	Intercom Microphone Level	A Bargraph in TPDesign4 that			0:10
		sets the volume of the intercom
		microphone.
29	Intercom Sound Level	A Bargraph in TPDesign4 that			0:9
		sets the volume of the intercom
		speaker.
30	Call Status Button	Displays status of calls, e.g.,		1:10
		incoming caller id,
		connected, rejected.
31	Navigate Up	Increments the intercom	1:13
		directory up.
32	Navigate Down	Increments the intercom	1:14
		directory down.
33	Intercom Setup Page	Navigates the intercom panel
		to the intercom Setup page.
		This requires a standard page
		flip to Setup.

Setup page

Setup

Name	Description	Channel	Address
		Port:Code	Port:Code
Auto-Answer OFF	Toggle the panel’s auto-answer feature off and on.	1:12
Session Timeout	A display of the current session timeout.		1:9
Increment Up	Increments the intercom session time up.	1:15
Increment Down	Increments the intercom session time down.	1:16
Room Name	The name of the panel as it appears in other intercom		0:265
	directories. See Naming a panel section on page 70.
Door Setup	Navigates to the Door Setup page. This requires a standard
	page flip to Door Setup.
Advanced Setup	Navigates to the intercom Advanced Setup page. This
	requires a standard page flip to Advanced Setup.
Exit Setup	Navigates to the intercom directory page. This requires a
	standard page flip to the intercom directory.

76 Metreau Entry Communicators