AMX MET-ECOM-D manual Creating Intercom Pages, Ending a Doorbell Call, Advanced Setup

Page 78

Using the NetLinx Module

The options in this page allow you see and view the incoming doorbell call, as well as adjust the microphone and speaker volume levels for both the doorbell and the panel.

Door Microphone Level - Use the Up/Down arrow buttons to raise/lower the doorbell’s microphone level. The current microphone level for the doorbell is indicated in the bargraph. Press the Mute button to mute the doorbell microphone.

Door Speaker Level - Use the Up/Down arrow buttons to raise/lower the doorbell’s speaker level. The current speaker level for the doorbell is indicated in the bargraph. Press the Mute button to mute the doorbell speaker.

Panel Microphone Level - Use the Up/Down arrow buttons to raise/lower the panel’s microphone level. The current microphone level for the panel is indicated in the bargraph. Press the Mute button to mute the panel microphone.

Panel Speaker Level - Use the Up/Down arrow buttons to raise/lower the panel’s speaker level. The current speaker level for the panel is indicated in the bargraph. Press the Mute button to mute the panel speaker.

The Doorbell Mute buttons only perform mute. They do not perform un-mute.

Ending a Doorbell Call

Press the End Call button in the Someone At The Door page to terminate the intercom session with the doorbell.

Creating Intercom Pages

The easiest method of creating your own intercom pages is to start with the pages provided by AMX in the module. You can change the aesthetics of the pages as long as the channel, address, level and links remain untouched.

For the more ambitious panel designers, the necessary intercom directory buttons and their information are contained in the Sample Intercom Page table on page 74.

Advanced Setup page

Advanced Setup

Name	Description	Channel	Address
		Port:Code	Port:Code

Allow Panel to be	Toggle the panel’s ability to be monitored off and on.	1:11
Monitored

Allow Panel to	Toggle the panel’s ability to monitor off and on.	1:10
Monitor

Room Name	The name of the panel as it appears in other intercom		0:265
	directories. See Naming a panel section on page 70.

Name Panel	Set the name of the panel as it appears in other intercom	0:334	0:265
	directories. (G4 Web Control: Server Name)

Back	Navigates the intercom panel to the intercom Setup page. This
	requires a standard page flip to Setup.

72	Metreau Entry Communicators

Image 78

Contents Metreau Entry Communicators AMX Limited Warranty and Disclaimer Table of Contents Using Zero Configuration Programming Creating Popup Pages Metreau Entry Communicators OverviewFront Components Metreau Entry Communicators Front ComponentsProduct Specifications MET-ECOM MET-ECOM SpecificationsRear Components Dimensions Product Specifications MET-ECOM-D MET-ECOM-D SpecificationsMET-ECOM-D Specifications Camera Viewing Angle Adjustment Positioning the CameraDefault Wiring and Connections Rear Panel ConnectorsEthernet Pinouts and Signals Ethernet 10/100 Base-T RJ-45 Wiring ConfigurationPoE Power Over Ethernet Connections PairingConnecting The Device via I/O Input/Output I/O Port Connections and WiringRelay Port Connections and Wiring Port Wiring SpecificationsFerrite Installation Required Installing the CAT5 Suppression FerriteSystem Diagram System Diagram IntercomWiring and Connections Metreau Entry Communicators Mounting and Installation MET-ECOM / MET-ECOM-D Installation OverviewDimensions Mounting Specifications Front ViewSide Views Top ViewTypical Installation Without Expansion Clips Typical Installation Without Expansion ClipsDevice and wall box must have an Earth ground Installing the Wall Box Without the Use of Tabs Wall Surface Installation Using Expansion Clips Recommended Cutout For Wall BoxReplacement drywall clip sets must be ordered from AMX Installing Into a Flat Surface Using Mounting Screws Flat Surface Installation PointsRemoving the Device From the Wall Using the Optional Surface Mount Box Included in the KitSurface Mount Box Specifications Provides mounting specifications for the CB-MET-ECOMSFerrite Installation Required Installing the Metreau Entry CommunicatorMounting and Installation Using Zero Configuration Bonjour Zero-Configuration ClientConnecting In a Network With a Dhcp Server Connecting In a Network Without a Dhcp Server This case the serial number is 218001WHP2980023Internet Properties TCP/IP Properties dialog Using Zero Configuration Metreau Entry Communicators Using the Configuration Manager Configuration Manager Summary of Settings Page initial viewCommand Buttons Accessing the Configuration ManagerSummary of Device Settings Summary of Device SettingsDevice Information NetLinx Settings Rebooting the DeviceIP Settings Checking the Firmware VersionConfiguration Configuration Page Network IP Settings TabSetting the IP Address Setting the DNS AddressConfiguration Page Network IP Settings Tab Configuration Page NetLinx Settings Tab Setting the Icsp Connection to the NetLinx MasterConfiguration Page NetLinx Settings Tab Configuration Page User Settings Tab Setting a New Username and PasswordConfiguration Page User Settings Tab Device Utilities Device UtilitiesUtility Meta Information File Upload Creating Display ImagesImage File Requirements ImagesSave the file as a .BMP image FIG Creating Dynamic Images TPDesign4 Resource ManagerCreating a New Dynamic Image Create Dynamic Image dialogUploading a Display Image To The Device Deleting a Display Image From the DeviceAudio/Video Page Audio Settings Tab Audio/Video Page Audio Settings TabSetting Device Audio Audio/VideoCamera/Video Stream Configuration Audio/Video Page Video Settings TabAudio/Video Page Video Settings Tab Video CodecSetting Device Video Audio/Video Page Display Settings TabSetting the Display Settings On The Device Audio/Video Page Display Settings TabTouch Panel Intercom Commands SENDCOMMANDsTouch Panel Intercom Commands ProgrammingSTREAM-STOP STREAM-GETSTREAM-PLAY MOD?RTP, Rtcp Video and Audio Streaming Commands RTP, Rtcp Video and Audio Streaming CommandsSET Audio GET VolumeSET Volume GET GainFace Plate LED Commands Face Plate LED CommandsCamera Commands Camera CommandsSET CAM-SAT SET CAM-CSTGET CAM-CST GET CAM-SATGET CAM-FLICK LCD CommandsLCD Commands SET DISP-BANNERSET DISP-CST SET DISP-BRTGET DISP-BRT GET DISP-CSTCommands CommandsSystem Commands System CommandsSET DOOR-DESC GET DOOR-DESCUpgrading Firmware via an IP Address Before beginning the Upgrade processUpgrading Firmware Preparing the Master for communication via an IPAssigning Communication Settings and TCP/IP Settings Verifying and Upgrading the device firmware via an IPSelect the device’s firmware file from the Files section FIG Intercom Setup Using the NetLinx ModulePanel Intercom Configuration Incorporating an Intercom Panel Into Your NetLinx SystemSetting the Intercom Session Timeout Setting Intercom Auto AnswerDoor Setup Disabling All DoorbellsDoor Chime Setup Assigning a Chime To a DoorbellAdvanced Setup Allowing a Panel To Be MonitoredAllowing a Panel To Monitor Naming a panelAnswering an incoming Intercom call Someone At The Door Answering an Incoming Doorbell CallEnding a Doorbell Call Advanced SetupCreating Intercom Pages Name Description Channel Address PortCodeDoor Chime Setup Door SetupIntercom Demo Sample IntercomName Description Channel Address Level PortCode Panel Directory Room Name Name of a panel Setup SetupSomeone At The Door Someone At The DoorCreating Popup Pages Doorbell Adjustments popupDoorbell Adjustments Popup Door Answer Call popupIntercom Answer Call popup Intercom Answer Call PopupMore Time popup More Time PopupProgramming Metreau Entry Communicators It’s Your World Take Control