AMX MET-ECOM-D manual Set Cam-Cst, Get Cam-Cst, Set Cam-Sat, Get Cam-Sat, Set Cam-Flick

Programming

Camera Commands (Cont.)

SET CAM-CST	Syntax:
Sets the display contrast level	"'SET CAM-CST <Contrast Level>'"
for the camera.	Variables:
	• Contrast Level = a value from 0 – 100 in percentage
	Example:
	SEND_COMMAND MET1,"'SET CAM-CST 50’"
	Sets the display contrast to approximately 50%.
GET CAM-CST	Syntax:
Retrieves the contrast level	"'GET CAM-CST'"
for the camera.	Variables:
	• Contrast Level = a value from 0 - 100 in percentage
	Example:
	SEND_COMMAND MET1,"'GET CAM-CST’"
	Gets the camera's contrast setting.
	Returns:
	CAM-CST= 45
	Gets the camera contrast setting is 45.
SET CAM-SAT	Syntax:
Sets the display saturation for	"'SET CAM-SAT <color saturation Level>'"
the camera.	Variables:
	• color Saturation Level = a value from 0 – 100 in percentage
	Example:
	SEND_COMMAND MET1,"'SET CAM-SAT 50’"
	Sets the display color saturation level to approximately 50%.
GET CAM-SAT	Syntax:
Retrieves the saturation level	"'GET CAM-SAT'"
for the camera.	Variables:
	• color Saturation Level = a value from 0 - 100 in percentage
	Example:
	SEND_COMMAND MET1,"'GET CAM-SAT’"
	Gets the camera's saturation level setting.
	Returns:
	CAM-SAT= 45
	Gets the camera saturation level setting is 45.
SET CAM-FLICK	Syntax:
Sets the flicker mode setting	"'SET CAM-FLICK <flick>'"
for the camera.	Variables:
	• Flick: INHIBIT, 50, 60
	Example:
	SEND_COMMAND STORM,"'SET CAM-FLICK 50’"
	Sets the anti-flicker mode to 50hz mode.

Metreau Entry Communicators 57