AMX MET-ECOM-D manual Face Plate LED Commands

Programming

Face Plate LED Commands

Metreau Entry Communicators support the following LED face plate SEND_COMMANDs on port 1.

Face Plate LED Commands

SET LED-LEVEL	Syntax:
Adjusts the brightness of the LED.	SEND_COMMAND <DEV>,"'SET LED-LEVEL <state>
To turn the LED ON or OFF.	<level>'"
	Variable:
	• State = ON, OFF
	• Level = 0 – 100. Represents 0%(dimmest) to 100% brightest.
	Example:
	SEND_COMMAND MET1,'"SET LED-LEVEL ON 50'"
	Sets the LED brightness level ON at 50%.
GET LED-LEVEL	Syntax:
Retrieves the brightness of the	SEND_COMMAND <DEV>,"'GET LED-LEVEL'"
LED. To turn the LED ON or OFF.	Example:
	SEND_COMMAND MET1,"'GET LED-LEVEL'"
	Returns:
	LEDLEVEL = <state> <level>
SET LED-STATE	Syntax:
Sets the state of the front button	SEND_COMMAND <DEV>,"'SET LED-STATE <State>’"
LED.	Variable:
	• State = IDLE, ACTIVE
	Example:
	SEND_COMMAND MET1,"'GET LED-STATE ACTIVE’"
	Sets the LEDS in an active pulsing state.
GET LED-STATE	Syntax:
Retrieves the brightness of the	SEND_COMMAND <DEV>,"'GET LED-STATE'"
LED. To turn the LED ON or OFF.	Returns:
	IDLE, ACTIVE
	Example:
	SEND_COMMAND MET1,"'GET LED-STATE’"
	Returns:
	’LEDSTATE = ACTIVE’

Metreau Entry Communicators 55