Using the NetLinx Module
Advanced Setup
The Intercom Advanced Setup page (FIG. 51) is accessed through the Intercom Setup page. The options on the Intercom Advanced Setup page allow you to set the panel intercom to be monitored, to monitor other intercom panels, and to name the panel. It is important to name the intercom panel; the name is displayed in other panels’ intercom call directory pages.
FIG. 51 Intercom Advanced Setup Page
Allowing a Panel To Be Monitored
1.Select the Setup button on your intercom page.
2.On the intercom setup page, press Advanced Setup. This launches the password numeric keypad.
3.Enter the password and press Done. The default password is Password 4 of the panel’s firmware Password Setup.
4.Press the button beneath Allow This Panel to be Monitored to toggle the option. The button indicates its current state. (FIG. 52)
FIG. 52 Room Monitored
5.Press Back to return to the intercom setup pages.
6.Press Exit when you are finished.
Metreau Entry Communicators | 69 |
|
|