Wiring and Connections
Ferrite Installation (Required)
Metreau Entry Communicators comes with a Cat5 Suppression Ferrite that must be clipped around the Ethernet cable, inside the wall box (no tools required).
1. Release the latch to open | 2. Insert the Cat5 cable | 3. Installation complete. |
the plastic enclosure. | and close the enclosure. |
|
FIG. 8 Installing the CAT5 Suppression Ferrite
When positioning the Ferrite clip inside the wall box, place the bottom of the clip flat against the back inside surface of the wall box, to allow sufficient room for the Metreau Entry Communicator unit (FIG. 9).
Ferrite clip installed on 
Ethernet cable
Ethernet cable and connector
Wall Box (front view)
Ensure that the Ferrite clip is resting flat against the inside back surface of the wall box to allow room for the Metreau Entry Communicator unit
FIG. 9 Fitting the Ferrite clip and Ethernet cable inside the Conduit Box
12 | Metreau Entry Communicators |