AMX MET-ECOM-D manual Configuration Page NetLinx Settings Tab

Using the Configuration Manager

Configuration Page - NetLinx Settings Tab

Select the NetLinx Settings tab of the Configuration page to access the NetLinx Settings tab (FIG. 33).

Use the options in this tab to view and edit the ICSP connection to the NetLinx master.

FIG. 33 Configuration Page - NetLinx Settings tab

Configuration Page - NetLinx Settings Tab

Connection	Displays the ICSP connection status (Not Connected / Connected).
Mode	Master connection mode:
	• URL(TCP) - The device connects to the specific IP/URL of a master via a TCP
	connection.
	• Auto - The device connects to the first master that responds. This setting requires you
	set the System Number.
	• Listen - The device "listens" for the master to initiate contact. This setting requires you
	provide the master with the device’s IP.
System Number	The ICSP system number.
Device Number	The ICSP device number.
Master IP/URL	IP or URL of master for URL master connection mode
Master Port Number	The ICSP socket port number.
Username	The ICSP network username (required if the NetLinx master is encrypted).
Password	The ICSP network password (required if the NetLinx master is encrypted).
Friendly Name	The friendly name of the device as it appears in the NetLinx master connection tree.

Setting the ICSP Connection to the NetLinx Master

1.In the Configuration page, select the NetLinx Settings tab.

2.Enter the system number assigned to the ICSP system.

3.Enter the device number to be assigned to the Metreau Entry Communicator in the Device Number field.

4.Enter the IP address of the master that the Metreau Entry Communicator is to connect with in the Master IP/URL field.

Metreau Entry Communicators 39