Using the Configuration Manager
Summary of Device Settings Page (Cont.)
IP Settings
IP | The IP setting of the unit; either Static or Dynamic. |
|
|
Host | The hostname of the unit. |
|
|
IP Address | The IP address of the unit. |
|
|
Subnet Mask | The subnet mask associated with IP addressing |
|
|
Gateway | The IP gateway used by this unit. |
|
|
MAC Address | The MAC address of the unit. |
|
|
NetLinx Settings |
|
|
|
Status | The connection status of the device. |
|
|
System Number | The NetLinx system number. |
|
|
Device Number | The ICSP device number of this unit. |
|
|
Master IP | The IP address of the NetLinx master connected to the device. |
|
|
Master Port | Port number for the NetLinx master connected to the device. |
|
|
Friendly Name | The friendly name of the device as it appears in the NetLinx master connection tree. |
|
|
System Resources |
|
|
|
File System | Amount of memory available to the file system. |
|
|
RAM | Available RAM on the device. |
|
|
Checking the Firmware Version
The firmware version is listed on the Summary of Device Settings page, in the Device Information section at the top of the page.
Determining the IP settings of the Metreau Entry Communicator
1.Browse to the Summary of Device Settings page.
2.The IP settings are listed in the IP Settings section.
Rebooting the Device
1.Open the Summary of Device Settings page.
2.Click the Reboot button on the left bottom of the page.
It is necessary to reboot the device in order to apply changes to several communication options, including Setting the IP and DNS Addresses, and setting the ICSP connection and encryption status for the NetLinx Master (see page 39).
36 | Metreau Entry Communicators |