MAINTENANCE-SHUNT ADJUSTMENT
SHUNT ADJUSTMENT
This pad pressure meter adjustment is factory set. Over the course of time it may become necessary to adjust this setting using the slotted connection on the shunt.
GREEN
Check the amp range when nuisance tripping of the pad motor controller indicates that the shunt may be out of adjustment.
GREEN |
RED |
0
60
APPROX. AMP RANGE
1.Connect a DC ampere meter to the positive battery lead. Running the machine with a pad, lower the pad to the floor until it is operating at 60±5 amps.
2.Moving the wire in the slot, adjust the pad pressure meter until the needle sets at the line between the blue and red areas.
86306300 CHARIOT BURNISHER 11/09/07 |
|