Recommendation 2 — Use when:
•system return water is not less than 135° F for prolonged periods of time
•system flow does impact flow through the boiler(ie. zoning, mixing)
Pipe Sizing and Notes
| SUPPLY |
| RETURN PIPING SIZE (IN) |
| ||||
|
|
|
|
|
| |||
| PIPING |
|
| RETURN | RETURN |
| ||
| SIZE (IN) |
|
| HEADER | BRANCH |
| ||
|
| (1) | RETURN (2) | (2A) | (QTY.) SIZE (2B) |
| ||
| 20°F |
| 40°F | 20°F | 40°F | 20°F | 20°F |
|
MODEL | DROP | DROP | DROP | DROP | DROP | DROP |
| |
2 |
| 2 | — | — | NOTES: | |||
2 |
| 2 | — | — | 1.All piping is schedule 40. | |||
2 |
| 2 | — | — | 2.Pipe sizes listed are based on a 20°F or 40°F differential (temperature drop). | |||
| — | — | Select one to match application. | |||||
| 2 | 2 | — | — | 3.When specified return piping size is less than 3”, install 3” X 12” nipple and appropriate | |||
| 2 | 2 | — | — | size bell reducer directly into boiler return tapping as shown. | |||
3 |
| 2 | 3 | 2 | — | — | 4.Drain valve — ball valve preferable, gate valve acceptable alternative | |
3 |
| 3 | — | — | (supplied by others). | |||
3 |
| 3 | — | — | - Minimum valve size per ASME code is 3/4” NPT | |||
4 |
| 4 | 3 | (2) 3 | 5.Proper boiler circulator sizing is listed in Appendix B. |
Figure 32: Series 24 Minimum Piping Recommendation 2 - Water Boiler
36