Machine Storage, Jaw Insert Replacement

300 Compact Pipe and Bolt Threading Machine

2.Keep oil filter screen to assure proper flow or clean oil to work. Oil filter screen is located in the bottom of oil reservoir. To clean filter screen, loosen the screw that secures filter to base and pull filter from oil line. Clean filter screen in solvent and blow out with com- pressed air if available. Do not operate machine with oil filter screen removed.

NOTE! RIDGID Thread Cutting Oil produces high qual- ity threads and maximizes die life. For infor- mation concerning its use and handling, refer to the labels on the oil containers. Disposal of the oil should be in accordance with government regulations.

Jaw Insert Replacement

NOTE! When teeth on jaw inserts become worn and fail to hold pipe or rod during operation, replace entire set of jaw inserts. Clean teeth of jaw inserts daily with wire brush.

1.Place screwdriver in insert slot and turn 90 degrees in either direction.

2.Place insert sideways on locking pin and press down as far as possible.

3.Hold insert down firmly with screwdriver, turn as so teeth face up.

Motor

Cover

Screws

Figure 23 – Loosen And Remove Motor Cover Screws

3.Loosen carbon brush holders and remove carbon brushes.

4.Install new brushes.

5.Reinstall brush holders and motor housing cover.

WARNING

Do not operate the threading machine with cover off. Always replace cover immediately after in- stalling brushes.

Screw Driver

Insert

To Remove

PRESS

DOWN

➔

Locking	Teeth
Pin
To Replace

Machine Storage

WARNING

Motor-driven equipment must be kept indoors or well covered in rainy weather. Store the machine in a locked area that is out of reach of children and people unfamiliar with threading machines. This machine can cause serious injury in the hands of untrained users.

Figure 22 – Jaw Insert Replacement

Replacing Brushes In Motor

NOTE! Check motor brushes every 6 months. Replace when worn to less than 1/2″ .

1.Unplug machine from power source.

2.Fully loosen four screws that hold motor housing cover in place and remove motor housing cover (Figure 23).

16	Ridge Tool Company

300 specifications

The RIDGID 300 is a highly regarded threading machine amongst plumbers and contractors, known for its durability, performance, and innovation in pipe threading. Designed for high-volume operations, this versatile tool can handle a wide range of pipe sizes, making it an indispensable asset in various plumbing projects.

One of the main features of the RIDGID 300 is its robust construction. Built to withstand rigorous use in demanding environments, the machine boasts a heavy-duty frame and components that contribute to its longevity. The compact design allows for portability, making it easy to transport to job sites, while its solid base provides stability during operation.

The RIDGID 300 employs advanced technologies that enhance its efficiency and performance. The machine is equipped with a powerful electric motor that delivers consistent and reliable performance, enabling users to complete threading tasks quickly and effectively. A unique gear drive system allows for smooth operation, reducing wear and tear on the equipment while ensuring precision in threading.

Another notable characteristic of the RIDGID 300 is its ability to accommodate various pipe materials. The machine is designed to handle iron, steel, and other common materials, making it a flexible choice for different applications. Additionally, it features a quick-change die head, enabling operators to switch pipe sizes rapidly, significantly increasing productivity on the job site.

The RIDGID 300 includes thoughtful safety features that help protect users during operation. Its integrated safety features reduce the risk of injury, allowing operators to focus on their work with confidence. Furthermore, the machine’s maintenance-friendly design allows for easy access to components, ensuring that routine servicing and repairs can be conducted with minimal downtime.

The versatility and adaptability of the RIDGID 300 make it suited for a variety of threading applications. Whether used in residential, commercial, or industrial environments, this threading machine consistently delivers outstanding results, earning it a reputation as a go-to tool for professionals in the plumbing industry. Its combination of power, durability, and thoughtful design elements ensure that the RIDGID 300 remains an essential piece of equipment for threading tasks, keeping pipelines secure and leak-free.