Reaming Pipe with No Reamer | RIDGID 1210 instruction

1210 Oil-less Threading Machine

Figure 8 – Cutting Pipe with No. 354 Cutter

7.Depress and hold down the foot switch with the left foot.

8.Tighten the feedscrew handle slowly and continu- ously until the pipe is cut. Do not force the cutter into the workpiece.

9.Release the foot switch and remove your foot.

10.Swing pipe cutter back to the UP position.

Reaming Pipe with No. 334 Reamer

1.With cutter and die head in their UP position, swing reamer into its operating position (Figure 9).

2.Check the ON/OFF switch to insure it is in the ON po- sition. Depress and hold the foot switch down.

3.Feed the carriage handwheel towards the pipe (Figure 9).

4.With slight handwheel pressure, feed reamer into pipe to achieve desired ream.

5.Release foot switch and return the reamer to its UP position.

Threading Pipe with No. 610 Die Head

NOTE! The 610 or 610A Die Head is designed for use ONLY with the 1210 Threading Machine. These die heads are NOT compatible with any other RIDGID threading equipment. No other RIDGID die heads will fit on the Model 1210 Threading Machine.

1.Check to insure the cutter and reamer are to the rear of the carriage (Figure 10).

2.Lower die head into threading position.

3.Check that the proper size dies are in the die head. Distinct die sets are required for 1/2″ – 3/4″ and 1″ pipe diameters.

4.Set die head to proper size and rotate throwout lever to CLOSED position.

NOTE! Refer to the section on the 610 Die Head for in- structions on changing dies and adjusting for proper size.

5.With the control switch in the ON position, step on foot switch and feed the carriage handwheel to- wards the pipe. Slight pressure on the handwheel will start dies.

NOTE! Coolant flow will begin automatically during threading. COOLANT FLOW WILL BE CON- TINUOUS STREAM OF DROPS! In addition to producing better quality threads, coolant will cool the workpiece through evaporation.

6.When thread is complete, rotate throwout lever to OPEN position, retracting dies.

7.Remove foot from foot switch.

8.Check the thread length and depth (Figure 18).

NOTE! Slight die head depth adjustment may be nec- essary due to variations in the pipe fittings.

Throwout Lever (in CLOSED position)

Figure 9 – Reaming Pipe with No. 334 Reamer

Figure 10 – Threading Pipe with No. 610 Die Head

Ridge Tool Company

1210 specifications

The RIDGID 1210 is an exceptional piece of equipment tailored for plumbing and pipefitting professionals. This compact yet powerful machine provides unparalleled reliability and performance, making it a staple in any contractor's toolkit. Designed to tackle some of the toughest jobs in the field, the RIDGID 1210 combines innovative technology with robust construction to ensure that it meets the demanding needs of users.

One of the standout features of the RIDGID 1210 is its advanced threading system. It boasts a 3-in-1 threading capability that allows users to thread various pipe sizes and materials with ease, including steel, iron, and PVC. This flexibility enhances productivity, as contractors can switch between different tasks without the need for multiple tools.

The machine is powered by a high-torque motor that delivers consistent performance even during heavy-duty applications. This ensures that users can complete their threading tasks with speed and precision. Moreover, the RIDGID 1210 is equipped with a self-oiling system, which significantly reduces maintenance time by keeping critical components lubricated and operating smoothly.

Portability is another key characteristic of the RIDGID 1210. Its lightweight design, coupled with ergonomic handles, allows for easy transport and maneuverability on job sites. This means crews can easily take the machine to various locations, enhancing their efficiency and reducing downtime.

The RIDGID 1210 also prioritizes user safety. It comes with built-in safety features, such as an emergency stop button and protective shields, which protect the user from rotating parts and debris. The thoughtful design extends to its user-friendly controls, which provide intuitive operation, making it accessible even for those who are new to threading machinery.

Furthermore, the RIDGID brand is synonymous with durability and quality. The 1210 is constructed from heavy-duty materials designed to withstand the rigors of both indoor and outdoor job sites. This robustness ensures that it remains a reliable investment for contractors looking for a long-lasting threading solution.

Overall, the RIDGID 1210 is a well-rounded threading machine that combines technology, durability, and user-centric design to deliver outstanding performance. Its versatility, power, and portability make it an essential tool for plumbing and pipefitting professionals, providing them with the capabilities they need to succeed in their projects. Whether you are a seasoned contractor or an aspiring plumber, the RIDGID 1210 is poised to become an invaluable ally in your work.