Emerson 00825-0100-4530 Rev EC manual Setup - Modbus communication parameters, Click Modbus Setup

Quick Installation Guide March 2013

12.The Basic Configuration with the Radar Master Wizard is now finished. Proceed with the Device Specific Setup to see which additional configuration is needed. You may be required to calibrate Vapor Compensation, to set up Probe End Projection, or to perform a Trim Near Zone depending on type of the device, application, and functions available.

For further information, see the Rosemount 5300 Series Reference Manual (Document No. 00809-0100-4530).

Step 1: Run Wizard

Step 2: Device specific setup

Step 3: Restart the device

Step 4: View live values from the device

Step 5: Make a complete backup of the device

For Signal Quality Metrics information and further configuration, see the Rosemount 5300 Series Reference Manual (Document No. 00809-0100-4530).

Setup - Modbus communication parameters

For transmitters with the Modbus option, do the following to configure the communication parameters:

1. In the Setup menu select General. The following window appears.

2.Choose the Communication tab.

3.Click Modbus Setup.

4. Enter the desired Modbus communication settings.

20