Emerson 00825-0100-4530 Rev EC Product certifications, EU conformity, Factory Mutual FM approvals

March 2013 Quick Installation Guide

Product certifications

EU conformity

The EC declaration of conformity can be found on page 33. The most recent revision of the EC declaration of conformity can be found at www.rosemount.com.

Safety Instrumented Systems (SIS)

The Rosemount 5300 Series has been evaluated by a third party, Exida, against hardware requirements according to IEC 61508. With a FMEDA (Failure Modes, Effects and Diagnostics Analysis) report with a Safe Failure Fraction (SFF) above 90%, 5300 is suitable in SIS according to the Prior Use methodology. For more information, go to: http://emersonprocess.com/rosemount/safety/. To order the certificate of FMEDA data, use option code QS.

Hazardous Locations certifications

North-American certifications

Factory Mutual (FM) approvals

Project ID: 3020497

Specific conditions of use:

WARNING: Potential Electrostatic Charging Hazard - The enclosure is constructed from plastic. To prevent the risk of electrostatic sparking, the plastic surface should only be cleaned with a damp cloth.

WARNING: The apparatus enclosure contains aluminum and is considered to constitute a potential risk of ignition by impact or friction. Care must be taken into account during installation and use to prevent impact or friction.

E51 Explosion-proof:

Explosion-proof for Class I, Div. 1,

Groups B, C, and D;

Dust-ignition-proof for Class II/III, Div. 1, Groups E, F, and G;

With Intrinsically Safe connections to

Class I, II, III, Div. 1, Groups B, C, D, E, F, and G.

Temp. Code T4

Ambient temperature limits: -50 °C to +70 °C2.

Seal not required.

Approval valid for HART, FOUNDATION fieldbus, and Modbus options.

1)Ordering information code for Product Certifications, see the Rosemount 5300 Series Product Data Sheet (Document No. 00813-0100-4530) or the Rosemount 5300 Series Reference Manual

(Document No. 00809-0100-4530).

2)+60 °C with FOUNDATION fieldbus or FISCO option.

25