Using your SmartBake® Custom continued
Step 8. Hot fresh crusty bread
When the bread is finished baking, the SmartBake Custom will beep and “0:00” will appear in the LCD window. A red light located on the control panel, will flash for approximately
Once the red light has stopped flashing, using oven mitts, remove the baking pan from the baking chamber by lifting it straight up. Note: the bread pan and loaf are very hot. Be careful not to place these on any heat sensitive surface that may scorch.
Allow the bread to cool in the bread pan for 10 minutes before removing. Then with the oven mitts tap the sides and base of the baking pan and turn upside down and gently shake until the bread slides out. If necessary, use a plastic spatula to loosen bread from the side of the pan. Place the bread on a wire rack and allow the bread to cool. We recommend that sufficient cooling time is approximately 15 minutes to ensure optimum bread texture and this also makes slicing easier.
Keep Warm
If the bread is not removed immediately after baking and PAUSE is not pressed, the SmartBake Custom will automatically switch to a Keep Warm cycle for 60 minutes. Warm air will circulate throughout the baking chamber to help reduce condensation.
After 60 minutes on Keep Warm cycle, the machine will beep and the machine will go to a standby mode. The bread can be removed from the baking chamber at the end of the baking cycle or any time during the Keep Warm cycle. Simply press the PAUSE button for 3 seconds to end the Keep Warm period and turn off the bread maker at the powerpoint. Note: Keep Warm does not apply to the Pasta Dough and Pizza Dough menus.
After using your SmartBake Custom
Unplug the machine and allow it to cool for 30 minutes before commencing another program. If you attempt to use the SmartBake Custom too soon, it may beep and the display will read ‘E:01’, indicating the SmartBake Custom has not cooled sufficiently. Wait until the SmartBake Custom has cooled and then press START.
Tip: The screen will change to sleep mode after 20 minutes, and the screen will darken. Push any button to light up the screen again.
13