Programming your SmartBake® Custom
The SmartBake technology of your breadmaker allows you to program 8 of your own recipes.
By following these few simple instructions your favourite recipes will be at your fingertips.
Before commencing programming of your favourite recipes, it’s important that you have a good understanding of each of the stages of the breadmaking cycle.
Note: The order in which each of these stages are discussed below are not true to the sequence of the breadmaking cycle. They have been detailed in the below layout for ease.
Preheat
Knead
Rise
Bake
Keep Warm
Baking Progess Monitor
Preheat
Kneading
Your SmartBake Custom features a Preheat function which helps to bring the ingredients to the optimum temperature for the yeast to activate when the kneading cycle begins. This is mainly used on Wheat breads and when making Jam, but is also handy to use on cold days.
The adjustable time for Preheat is: 0 - 99 minutes.
The Kneading cycle turns your ingredients to dough and is the most vital stage of breadmaking. It mixes the ingredients, activates the yeast and forms the frame work for the dough to rise
The adjustable time for Knead 1 is: 0 - 10 minutes.
The mixing paddle speed: Slow
The adjustable time for Knead 2 is: 0 - 30 minutes.
The mixing paddle speed: Fast
Although included as part of the kneading cycle, the knock down controls the expansion of gas in the rising cycles (ridding unwanted air pockets).
The adjustable time for Knockdown 1 is: 0 - 30 seconds.
The mixing paddle speed: Fast
The adjustable time for Knockdown 2 is: 0 - 30 seconds.
The mixing paddle speed: Fast
19