DeLonghi A 1346 G manual Connecting the Feeder Cable, Feeder Cable Section type H05RR-F

CONNECTING THE FEEDER CABLE

To connect the feeder cable to the cooker it is necessary to:

■Remove the 6 screws that hold shield A behind the cooker.

■Open completely the cable clamp D.

■Position the U bolts onto terminal block B (fig. 1.1 - 1.2).

■Insert the feeder cable into the cable save P. The supply cable must be of a suitable size for the current requirements of the appliance.

■Connect the phase and earth cables to terminal B.

■Pull the feeder cable and block it with the cable clamp D

■Re-mount shield A.

N.B. The earth conductor must be left about 3 cm longer than the others.

Figure 1.1

B

A

D

P

6

FEEDER CABLE SECTION type “H05RR-F”

230-240 V		3 x 6 mm2 (**)
230 -240	V3	4 x 4 mm2	(**)
400 -415	V 3N	5 x 2,5 mm2 (**)
400 -415	V 2N	4 x 4 mm2	(**)

(**)– Connection with wall box con- nection

–Diversity factor applied

Figure 1.2

230 V - 240 V

1 2 3 4 5

		L1		N (L2) PE
230 V3 - 240 V3
	1	2	3	4	5
		L1		L2 L3 PE
400 V 3N - 415 V 3N
	1	2	3	4	5
	L1 L2 L3				N PE
400 V 2N - 415 V 2N
	1	2	3	4	5
	L1		L2		N PE